Setting up
Follow these simple steps to prepare your phone(s) ready for use.
Finding a location
Make sure your phone is:
•Within 1.8 metres of a power and phone socket so that the cords will reach.
•At least 1 metre away from other electrical appliances, to avoid interference.
•Not located in humid or damp conditions, e.g. in a bathroom.
Connecting your phone
1Connect the base power supply into the socket on the back of the base. Plug the other end into the mains power socket.
WARNING
Use only the power supply that came with your phone.
Using another power supply could seriously damage your phone and invalidate your warranty.
Do not connect the telephone line cord until your handset is fully charged. This will prevent the risk of the phone being answered before the batteries are charged. Answering the phone before the batteries are fully charged may prevent them from reaching their optimum capacity.
2On each charger (multi-packs only):
Connect the power supply attached to each charger into the mains and switch on.
[4]
