Installing Your Phone, Charge the Battery | Uniden DECT2180 Series

Installing Your Phone

Charge the Battery

1) Unpack all handsets, battery packs, and

battery covers. If any battery cover is already on the handset, press in on the notch and slide the cover down and off.

Black Red

2)Line up the red and black wires on the battery pack with the label inside the handset.

3)Push the connector in until it clicks into place; tug gently on the wires to make sure the battery pack is securely connected.

4) Place the cover over the battery

compartment and slide it up into place.

5) Connect the base AC adapter to the AC IN 7.8V jack on the rear of the base. Route

the cord through the molded wiring channel as shown.

6) If you have accessory handsets, connect a

charger AC adapter to each charger's AC IN 8V

jack and set the plug into the notch as shown. (These adapters might already

be connected.)

7) Plug the other end of each adapter into a standard 120V AC power outlet.

Image 3

Uniden DECT2180 Series manual Installing Your Phone, Charge the Battery

Contents

DECT2180 Series Users Guide Whats in the box?You might also find Whats in the manual? Important Safety Instructions Charge the Battery Installing Your Phone Try Connect the Telephone CordTest the connection Make a quick test call. Press End to hang up Parts of the Base Getting to Know Your Phone Parts of the Handset Handset keys and how they work Key nameDuring text entry move the cursor to the right Icon What it means Reading the DisplayOn the base On the handset Using the Handset Menu By pressing a key on the twelve-key dial pad Ans. Setup Menu Follow these steps Entering Text on Your Phone Base speakerphone lets you use the following features Using Your PhoneUsing the Base Speakerphone Changing the Volume Using the Redial List Using Caller ID and Call WaitingDialing from the Caller ID list Add the number to the call block list see Using Seven-Digit DialingUsing Call Waiting Caller ID menu options Phonebook entry options Using the PhonebookChain Dialing Phonebook menu options Finding a Lost Handset Using Special FeaturesUsing Do Not Disturb Using Call Block Call block entry options Using Voice Message NotificationResetting the voice message indicator Call Blocking menu options Expanding Your Phone Using Multi-station FeaturesUsing Conference Calling Using Privacy Mode Using Call Transfer Using the IntercomFrom the base From a handset You can set up your answering system from any handset Using the Answering SystemSetting Up Your Answering System Ans. Setup menu options Getting Your Messages Accessing your answering system from a handset How to operate your answering system Screening Your CallsFrom the base From a handset remote Operation With the phone in standby, open the menu from any handset Using the System While Youre Away from HomeProgramming a security code Dialing in to your system Solving Problems If… Try…Unavailable Adjust the audio tone Weak or Hard To Hear AudioAnnounce Only On 1 handset or in 1 location Here are some hints for when the static isInstalling a line filter or DSL filter Noise or Static On The Line Do you have the base the handset is registered to? Yes Resetting and Registering HandsetsSystem Reset menu Changing from Tone to Pulse Dialing Does the handset fit in the base cradle? Yes Handling Liquid DamageRegistering a handset Moisture and liquid can damage your cordless phone Terms Used In This Guide Important Information Compliance information FCC Part 15 information One-year Limited Warranty