Connect the Telephone Cord, Try | Uniden DECT2180 Series guide

8)Place a handset in the base and any accessory handset(s) in the charger(s) with the display(s) facing forward. The charge light on the base and each charger should all turn on.

If...	Try...
the charge	- reseating the handset.
light does	- checking the AC adapter connection.
not turn on	- seeing if the outlet is controlled by a
	wall switch.

Charge all handsets completely (about 15 hours) before using them.

Connect the Telephone Cord

Use the telephone cord to connect the TEL LINE jack to a standard telephone wall jack.

Test the connection
1) Pick up the handset from
the cradle and press
Talk. You should hear a
dial tone, and the display
should say Talk.
If...	Try...
you don't hear a dial tone or the	checking the connection between
display says Check Tel Line	the base and the phone jack.

2) Make a quick test call. (Press End to hang up.)

	If...	Try...
	you keep hearing a dial tone	changing to pulse dialing mode
	you keep hearing a dial tone	(see page 25).
		(see page 25).
	there's a lot of noise or static	see page 24 for tips on avoiding
	there's a lot of noise or static	interference.
		interference.

3)Test any accessory handsets the same way. If you can't get a dial tone or the handset display says Unavailable, try moving the handset closer to the base or resetting it (see page 25). Charge all handsets completely (about 15 hours) before using them.

Image 4

Uniden DECT2180 Series Connect the Telephone Cord, Test the connection, Make a quick test call. Press End to hang up, Try

Contents

Whats in the box? DECT2180 Series Users GuideYou might also find Important Safety Instructions Whats in the manual? Installing Your Phone Charge the Battery Connect the Telephone Cord Test the connectionMake a quick test call. Press End to hang up Try Getting to Know Your Phone Parts of the Base Parts of the Handset Key name Handset keys and how they workDuring text entry move the cursor to the right Reading the Display On the baseOn the handset Icon What it means Using the Handset Menu Ans. Setup Menu By pressing a key on the twelve-key dial pad Entering Text on Your Phone Follow these steps Using Your Phone Using the Base SpeakerphoneChanging the Volume Base speakerphone lets you use the following features Using Caller ID and Call Waiting Using the Redial ListDialing from the Caller ID list Using Seven-Digit Dialing Using Call WaitingCaller ID menu options Add the number to the call block list see Using the Phonebook Chain DialingPhonebook menu options Phonebook entry options Using Special Features Using Do Not DisturbUsing Call Block Finding a Lost Handset Using Voice Message Notification Resetting the voice message indicatorCall Blocking menu options Call block entry options Using Multi-station Features Using Conference CallingUsing Privacy Mode Expanding Your Phone Using the Intercom Using Call TransferFrom the base From a handset Using the Answering System Setting Up Your Answering SystemAns. Setup menu options You can set up your answering system from any handset Accessing your answering system from a handset Getting Your Messages Screening Your Calls How to operate your answering systemFrom the base From a handset remote Operation Using the System While Youre Away from Home Programming a security codeDialing in to your system With the phone in standby, open the menu from any handset If… Try… Solving ProblemsUnavailable Weak or Hard To Hear Audio Adjust the audio toneAnnounce Only Here are some hints for when the static is Installing a line filter or DSL filterNoise or Static On The Line On 1 handset or in 1 location Resetting and Registering Handsets System Reset menuChanging from Tone to Pulse Dialing Do you have the base the handset is registered to? Yes Handling Liquid Damage Registering a handsetMoisture and liquid can damage your cordless phone Does the handset fit in the base cradle? Yes Important Information Terms Used In This Guide Compliance information FCC Part 15 information One-year Limited Warranty