Reading the Display, On the base | Uniden DECT2180 Series specs

Reading the Display

On the base

Status icons

Time

12:00A

Messages: 1 New

Message counter

On the handset

Status icons

Time

12:00A Handset #1

CallercountID New CID: 5

Handset banner

The table below shows the possible icons and what they mean. Since the icons appear based on what you're doing with the phone, you won't ever see all of these icons at the same time.

Icon					What it means
					The ringer is turned off: this station will not ring when a call
					comes in.
					You have a voice message waiting (see the section titled
					You have a voice message waiting (see the section titled
					"Using Voice Message Notification" on page 15).



					Privacy Mode is on: no other station can join your call.

					(Handset only) The speakerphone is on.

					(Handset only) The microphone is muted, & the caller can't
					hear you.
					(Handset only) T-coil mode is on. (See "Do you use a T-coil
					hearing aid?" on page 24.)
					(Handset only) The battery is 1) fully charged, 2) half charged,
					3) getting low, or 4) empty.

Page 8

Image 8

Uniden DECT2180 Series manual Reading the Display, On the base, On the handset, Icon What it means

Contents

You might also find DECT2180 Series Users GuideWhats in the box? Important Safety Instructions Whats in the manual? Installing Your Phone Charge the Battery Connect the Telephone Cord Test the connectionMake a quick test call. Press End to hang up Try Getting to Know Your Phone Parts of the Base Parts of the Handset During text entry move the cursor to the right Handset keys and how they workKey name Reading the Display On the baseOn the handset Icon What it means Using the Handset Menu Ans. Setup Menu By pressing a key on the twelve-key dial pad Entering Text on Your Phone Follow these steps Using Your Phone Using the Base SpeakerphoneChanging the Volume Base speakerphone lets you use the following features Dialing from the Caller ID list Using the Redial ListUsing Caller ID and Call Waiting Using Seven-Digit Dialing Using Call WaitingCaller ID menu options Add the number to the call block list see Using the Phonebook Chain DialingPhonebook menu options Phonebook entry options Using Special Features Using Do Not DisturbUsing Call Block Finding a Lost Handset Using Voice Message Notification Resetting the voice message indicatorCall Blocking menu options Call block entry options Using Multi-station Features Using Conference CallingUsing Privacy Mode Expanding Your Phone From the base From a handset Using Call TransferUsing the Intercom Using the Answering System Setting Up Your Answering SystemAns. Setup menu options You can set up your answering system from any handset Accessing your answering system from a handset Getting Your Messages From the base From a handset remote Operation How to operate your answering systemScreening Your Calls Using the System While Youre Away from Home Programming a security codeDialing in to your system With the phone in standby, open the menu from any handset Unavailable Solving ProblemsIf… Try… Announce Only Adjust the audio toneWeak or Hard To Hear Audio Here are some hints for when the static is Installing a line filter or DSL filterNoise or Static On The Line On 1 handset or in 1 location Resetting and Registering Handsets System Reset menuChanging from Tone to Pulse Dialing Do you have the base the handset is registered to? Yes Handling Liquid Damage Registering a handsetMoisture and liquid can damage your cordless phone Does the handset fit in the base cradle? Yes Important Information Terms Used In This Guide Compliance information FCC Part 15 information One-year Limited Warranty