Direct Wall Mounting | Uniden DXAI685 guide

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following:

∙Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

∙Make sure the wall material is capable of supporting the weight of the Base Unit and Handset.

∙Use #10 screws with anchoring devices suitable for the wall material where the Base Unit will be placed.

1.	Insert two mounting screws 315⁄16 inches apart. Allow	3/16 IN.
1.	Insert two mounting screws 315⁄16 inches apart. Allow
	about 3⁄16 of an inch between the wall and screw heads for
	about 3⁄16 of an inch between the wall and screw heads for
	mounting the phone.

3 15/16 IN.

2.Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit.

3.Place the cord inside the molded channel on the bottom of the Base Unit.

RING VOL	PULSE-TONE DC IN 9V
OFF-LO-HI	+	- TEL LINE

14

Image 14

Uniden DXAI685 important safety instructions Direct Wall Mounting

Contents

Contents Page Important Safety Instructions Battery Safety Precautions Features Introduction Included with the DXAI685 DXAI685 Range Telephone Line ProblemsImportant Electrical Considerations Radio Interference Telephone Line Outlets InstallationSelecting a Location Connecting the Telephone Cords Applying Power to the Base Unit Desk or Tabletop Installation Place the Base on a desk or tabletop Use only the Uniden AC Adapter supplied with this Phone Wall Installation Standard Wall Plate Mounting Place the AC Adapter cord inside the molded channel Direct Wall Mounting Ring VOL PULSE-TONE DC OFF-LO-HI Setting the Handset Retainer Put the retainer back into its slot on the Base Unit This page intentionally blank Extending the Base Unit Antenna Setting Up Your PhoneInstalling the Handset Battery Pack Page Cleaning the Battery Contacts Initial Battery Charging Charging the Battery PackLow Battery Indicator To Avoid Memory Effect Setting the Pulse/Tone SwitchBattery Memory Effect Handset Volume Controls Base Volume Controls Automatic Digital Code Security Page Page To delete your local area code Entering the Local Area CodeTo enter your local area code To turn Caller ID on Call Waiting on Setting Caller ID on Call WaitingSetting the AutoTalk Feature To turn Caller ID on Call Waiting off Autotalk on ON-1 OFF-0 Autotalk on ON-1OFF-0 Autotalk OFF ON-1OFF-0 To turn AutoTalk off Using Your Phone Making Calls Receiving Calls Answering a Call with AutoTalk EnabledAnswering a Call without AutoTalk Enabled Using the Flash Key with Call Waiting Redialing the Last Number Called Viewing Calls in Memory Using Caller IDCaller ID Display LCD with Handset on Base Calling the Displayed Number Deleting Caller ID messages Entering a Number in Dial Memory Programming Your PhoneStoring a Caller ID memory number in Dial Memory NAME? Calling a Number Stored in Memory Editing and Deleting Numbers in Dial Memory Bob Jones Integrated Answering System ∙ Time and Day Stamp ∙ Toll Saver Turning the Answering System On/Off Answering System SetupSetting the Clock and PIN Code Reviewing Time and Day Stamp Setting Your Outgoing Message OGMPreset Messages Selecting a Preset OGM Recording Your Personal OGM Using the Reset Button VOX/Calling Party Control FeatureSetting the Toll Saver Switch Page Using Your Answering System Playing New Messages Playing a Stored Message Repeating a Message Skipping a Message Deleting a Message Deleting All Messages Message Full Indication Leaving a Memo MessagePage Using a Touch-Tone Phone Remote Operation Troubleshooting Telephone Troubleshooting Chart Answering System Troubleshooting Chart Specifications Base Unit Dxai Precautions Handset Controls and Keys Base Unit Controls and Keys One Year Limited Warranty