If the Battery icon begins to flash, the phone is programmed to eliminate its functions to save power. The table below describes what to do to return your phone to normal operation.
DURING A CALL | IN STANDBY MODE |
|
|
Only the Abutton operates. | None of the buttons will operate. |
The Handset beeps and the battery icon flashes | The Handset beeps and the battery icon flashes |
once every 3 seconds. | once every 3 seconds. |
|
|
Complete your call as quickly as possible. | You will not be able to make a call. |
|
|
Return the Handset to the Base Unit for charging. | Return the Handset to the Base Unit for charging. |
|
|
Note: Allow 15 to 20 hours without any interruption for the Handset to fully recharge.
Battery Memory Effect
Rechargeable batteries can develop a “memory” (reduced charge capacity) caused by repeated charge and discharge cycles. The battery life will seem to be shorter every time you use the unit.
To Avoid Memory Effect
At least once a month, operate the unit until the “Battery Low” indicator appears. Avoid “topping off” the charge after using the phone for a short time. Also, do not charge the Rechargeable Battery for extended periods of time.
Setting the Pulse/Tone Switch
Be sure the PULSE/TONE switch is in the TONE position.
Note: Most phone systems are Tone dialing. Check with your local phone company if you are not sure whether your system is Tone or Pulse dialing.
23
