Answering System Troubleshooting Chart
Problem | Suggestion |
|
|
Answering System does not work. | ∙ Make sure that the Base Unit is plugged in. |
| ∙ Make sure the Answering System is turned on. |
| ∙ Press the RESET button to reset the system after an AC line |
| spike. |
Answering System does not answer calls. | ∙ Set the REC TIME/ANN/4/1 switch in either the |
| |
| ∙ The memory may be full. Delete some or all of the saved |
| messages. |
Messages are incomplete. | ∙ The incoming messages may be too long. Remind callers to |
| leave a brief message. |
| ∙ The memory may be full. Delete some or all of the saved |
| messages. |
No sound on the Base Unit speaker during call monitoring or | ∙ Adjust the volume control on the Base Unit. |
message playback. |
|
|
|
Cannot access remote | ∙ Make sure you’re using the correct PIN number. |
phone. | ∙ Make sure that the |
| |
| transmit the tone for at least two seconds. If it cannot, you |
| may have to change to another phone. |
56