Programming Your Phone
All programming functions must be completed when your phone is in the standby mode because programming keys do not function while you are on the phone.
Storing a Number in Memory
Use these keys to store a number in memory.
Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step.
1.Remove the Handset from the Base Unit.
2.Press M.
The TALK/BATT LOW LED blinks.
3.Enter the number you want to store
(up to 16 digits). | 5 |
| 5 |
| 5 |
| 1 |
| 2 |
| 1 |
| 2 |
4.If a pause is needed during dialing to access a long distance service, press
P.
9P
5
5
5
1212
Note: The P button counts as one digit. Pressing P more than once increases the length of the pause between numbers.
5. Press M again.
6. Enter the memory location
A tone indicates that the number is stored.
DX834/DXC834 | 17 |
