2.Plug the AC Adapter into the Base Unit.
3.Place the AC Adapter cord inside the molded channel.
4.Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit.
5.Place the cord inside the molded channel on the bottom of the Base Unit.
6.Place the Base Unit on the screws and push down until it’s firmly seated.
7.Plug the other end of the telephone line cord into the wall jack.
8.Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch.
DX834/DXC834 | 9 |
