Uniden DX834, DXC834 important safety instructions Using Your Phone, Making and Receiving Calls

Using Your Phone

Making and Receiving Calls

The following features of the DX834 phone are different depending on the Handset’s location when you make or receive a call.

	Handset On Base		Handset Off Base
Answer Call	Pick up Handset		Press T.
	(AutoTalk)
	1)	Pick up Handset.	1)	Press T.
	2)	Press T.
Make Call			2)	Listen for dial
	3) Listen for dial		tone.
	tone.		3)	Dial the number.
	4)	Dial the number.
Hang up,	Return Handset to		Press T
	Base (AutoStandby)
	1)	Pick up Handset.	1)	Press T.
	2)	Press T.
Redial,			2)	Listen for dial
	3) Listen for dial		tone.
	tone.		3)	Press	.
	4)	Press

Note: Sometimes when you press T to hang up the phone, you may get an error tone and the phone will not disconnect. If this happens, place the Handset on the Base Unit or press T again while holding the Handset close to the Base Unit.

Changing Channels, Flash, and Page/Find

To change channels or access call waiting while the phone is in use, or to use the one-way page to locate the Handset, follow these steps:

	Press These Keys		You Will Hear
	Press C.		A click similar to
	Note: Change		when	is
Changing	channels to help		pressed. There
	eliminate		may be a brief
Channels	background noise.		pause as your
			phone searches
			for a clear
			channel.
	If the call waiting		A click, a short
	tone sounds,		pause, then the
	press	to	caller (if you were
	accept the		on a call).
	waiting call
FLASH	— OR —		— OR —
	If you have
			A click, and then
	finished a call
	and want to make		a dial tone so you
	another call,		can make a
	press	to	different call.
	hang up and get
	a dial tone.
	Press PAGE/FIND		The Handset will
Page/Find	on the Base Unit		beep more than 5
	to locate the		times.
	Handset

DX834/DXC834 15