Desk or Tabletop Installation
1. Place the Base on a desk or tabletop.
2. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit.
3.Place the AC
Adapter cord around the strain relief.
4.Plug one end of
the long telephone cord into the TEL LINE jack on the Base Unit.
5.Plug the other end of the cord into the telephone jack on the wall.
6.Plug the AC
Adapter into a standard 120V AC wall outlet.
Note: Do not use an outlet controlled by a wall switch.
\
Use only the Uniden AC Adapter
supplied with this phone.
DX834/DXC834 | 7 |
