WorkPad z50 Mobile Companion 17
Installing the ROM/DRAM Ca rd
This section describes how to install the ROM card or the
optional DRAM card to th e WorkPad z50.
Note: When you remove the ROM/DRAM card, you wi ll lose
all stored data. Before you remove the ROM/DRAM card, be
sure to back up all data and applicati ons in th e bas e
memory.
Caution: Before removing or i nserting the ROM/DR AM card,
all power sources (AC p ower, the main batter y pack, and the
backup batteries) must be removed.
Follow these instructions wh en ins erting the ROM/DRAM
card:
1. Place the WorkPad z50 in to suspend mode and
disconnect AC power.
2. Turn the WorkPad z50 upside down.
3. Remove the main battery and remov e t h e bac ku p
batteries.
4. Unscrew the single (c aptive) screw that secur es the
ROM/DRAM card compartment cover to the chassis.
Remove the cover.
Unscrew the screw
that secures the
ROM/DRAM card cover
to the chassis and
remove the ROM/DRAM
card cover.
ROM card DRAM card
5. Locate the ROM/DRAM card Slot.
6. Find the notch on the si de of the card.
20