Checkout Guide

Use the following procedure as a guide for computer problems.

1.Obtain the failing symptoms in as much detail as possible.

2.Verify the symptoms by attempting to re-create the failure by running the diagnostic test (refer to “Running the Diagnostics Test” on page 27) or by repeating the same operation.

Note

To run the diagnostics test, refer to “Running the Diagnostics” on page 27.

If the symptoms are intermittent and cannot be re-created (and therefore not verified), go to “Symptom-to-FRU Index” on page 21 and then go to “Intermittent Problems” on page 26.

3.Use the following table with the verified symptom to determine which page to go to. Search the symptoms column, and find the description that best matches your symptom; then go to the page shown in the “Refer To” column.

Symptoms (Verified) Refer To

Power failure: The power indicators (AC Adapter LED or Power on/Battery status LED) are not lit.

Audio is not properly functioning.

Keyboard does not work properly.

Internal fax/modem does not work.

Suspect mainboard or ROM card problems.

TrackPoint problems.

Cradle does not communicate properly.

External monitor does not display.

The diagnostic test detected an error and displayed an error code.

“Power Systems Checkout” on page 9.

“Audio Checkout” on page 7.

“Keyboard Checkout” on page 8.

“Modem Checkout” on page 9.

“ROM Card Checkout” on page 14.

“TrackPoint Checkout” on page 15.

“Cradle Checkout” on page 15.

“External Monitor Self-Test” on page 15.

“Running the Diagnostics Test” on page 27.

6 IBM WorkPad z50, Mobile Companion 6

Page 21
Image 21
IBM s37l-2095-00 manual Checkout Guide, Symptoms Verified Refer To