EXAI2980A
Chain Dialing
The 10 memory locations on the handset are not limited to phone numbers. You may want to store in memory a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, when you are prompted to enter the account number, simply press m and then the location where the special number has been stored.
Store your special number with identifying name in memory as you would a phone number. (Refer to "Storing Phone Numbers and Names" on page 14.) Enter a pause as necessary in the sequence.
A pause counts as one digit and represents a two second delay in time between digits as they are sent.
Editing a Stored Name and/or Phone Number
1)Press and hold m until “Memory Store“ is displayed.
2)Press ▲ and ▼ or enter a number (0 - 9) to select the memory location you would like to edit.
3)Press select.
The following screen appears with the memory location number that you have selected in the display.
4)Press ▲ or ▼ to select “Edit Memory“ , then press select. The following screen appears.
The cursor flashes indicating that the display is ready for the name to be edited. When a name has not been stored, the cursor appears at the beginning of the second line.
5)Use the number keys, */tone 
, # 
, or delete to edit the name. (See page 14.) To edit only the phone number, skip this step.
6)Press select. The following screen appears.
The cursor flashes indicating that the display is ready for the number to be edited.
7)Use the number keys, redial/p or delete to edit the phone number. The phone number cannot exceed 20 digits. (See page 14.)
If you don´t want to change the phone number, skip this step.
Memory Store
1 UNIDEN CORP
2 JOHN DOE
Edit Memory 1
Delete Memory 1
Go Back
Store Name
UNIDEN CORP
Store Number 8002971023
M E M O RY D I A L I N G [ 17 ]
