•Normally the idle time for the menu mode is 30 seconds before the system returns to standby. However for setting the time, the idle time is extended to two minutes.
•Press and hold skip/ff or repeat/rew to quickly scroll through the numbers on the display.
Setting the Time
The clock on the EXAI378 series answering system starts when power is supplied to the base. Follow these steps to set the clock to the correct time.
1)Press menu.
The system announces “Time” and the current time. The message counter displays the current numbers ([ 
]
status
through [ 
]) indicating the day of the week.
2)Press skip/ff or repeat/rew until the correct day is announced. The numbers [ 
] through [ 
] are displayed on the base.
3)Press set/ringer to select the day.
4)Press skip/ff or repeat/rew until you hear the correct hour setting. The numbers [ 
] through [ 
] are displayed on the base as each hour is announced.
5)Press set/ringer to select the hour.
6)Press skip/ff or repeat/rew until you hear the correct minute setting. The numbers [ 
] through [ 
] are displayed on the base as each minute is announced.
[ 40 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E
