Using Basic Call Management Functions

3

 

Setting Call Waiting

 

 

 

 

 

STEP 5 Press save.

Disabling Do Not Disturb

Do Not Disturb Softkey

To deactivate Do Not Disturb, press the -dndsoftkey.

Do Not Disturb Deactivation by using the Star Code

Enter *79 to deactivate Do Not Disturb.

Do Not Disturb Deactivation by using Setup

You can also deactivate Do Not Disturb by pressing the Setup button and selecting Preferences > Do Not Disturb.

Setting Call Waiting

 

Call waiting alerts you to an incoming call while you are on another call by ringing

 

your phone and displaying a status message. If you turn call waiting off, incoming

 

calls do not ring your phone while you are on another call; the incoming call hears a

 

busy signal or message. Call waiting can be enabled continuously or on a per-call

 

basis.

 

You can also turn call waiting on or off from your PC by using the IP phone Web

 

interface.

 

For the Cisco SPA501G, you can only configure Call Waiting in the web

 

configuration utility or set Call Waiting by using the Star Code.

 

Using Setup

 

 

STEP 1

Press Setup.

STEP 2

Select Preferences.

STEP 3

Choose Call Waiting and press edit.

STEP 4

Press the y/n softkey to toggle call waiting on or off.

STEP 5

Press ok.

Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide

39

Page 39
Image 39
Cisco Systems SPA502G, SPA514G, SPA512G, SPA504G, SPA509G, SPA501G, SPA508G manual Setting Call Waiting, Disabling Do Not Disturb