![](/images/new-backgrounds/1200375/200375107x1.webp)
Using Advanced Phone Features | 4 |
| |
Monitoring and Accessing Another Phone |
|
|
|
|
|
| Configuring Auto Answer |
| To configure your phone to auto answer pages: |
|
|
STEP 1 | Press the Setup button. |
STEP 2 | Select Preferences. |
STEP 3 | Choose Auto Answer Page and press edit. |
STEP 4 | Press y/n to choose yes (enable) or no (disable). |
STEP 5 | Press ok. |
STEP 6 | Press save. |
|
|
Monitoring and Accessing Another Phone
Your system administrator can configure your phone so that you can monitor other phones on the network from your phone if the feature is available on your system. If this feature is configured, some line buttons on your phone are assigned to display the status of another user phone. For example, if your line 4 is configured to display Bob’s phone line, the button color shows you the status of that phone line:
•Green: Line is idle.
•Red (steady): Line is active or in use.
•Red (blinking): Line is ringing.
•Orange (solid): Line is unregistered (cannot be used).
•Orange (blinking): Line is not configured properly.
In addition, if your system administrator has configured it, you can press the same line button (4) to speed dial Bob’s extension, or to pick up a ringing call at his extension.
NOTE Not applicable to the Cisco SPA502G or Cisco SPA512G.
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide | 54 |