![](/images/new-backgrounds/1200375/200375147x1.webp)
Using the Phone Web User Interface | 5 |
| |
Viewing Attendant Console Status |
|
|
|
|
|
Viewing Attendant Console Status
The SPA500S or SPA500DS user parameters are displayed in the Attendant
Console Status window.
The table identifies and describes the values in the Attendant Console Status tab.
Parameter | Description |
|
|
Unit Enable | Yes indicates the unit is enabled. No indicates it is disabled. |
|
|
Unit Online | Yes indicates the unit is connected. No indicates it is not |
| connected. |
|
|
Subscribe | Time in seconds when the current subscription expires. |
Expires | After the subscription expires, the attendant console |
| automatically requests a new subscription. |
|
|
Subscribe Retry | Length of time the attendant console waits to try again if |
Interval | the subscription fails. |
|
|
HW Version | Hardware version of the attendant console. |
|
|
SW Version | Firmware (software) version of the attendant console. |
|
|
Key | Name assigned to each key |
| or key |
|
|
Name | Name identifying the entry. |
|
|
Type | Function (for example, speed dial) that is enabled for each |
| key on the attendant console. |
|
|
Line | Displays the extension assigned to each key on the |
| attendant console. |
|
|
Station | Subscribe URI (uniform resource identifier) configured for |
| each key on the attendant console. |
|
|
Subscribed | Subscription status of the unit/key. The value can be Yes, |
| Fail, or N/A. N/A indicates that the feature/function (fnc) of |
| that line does not require a subscription (such as speed |
| dial). |
|
|
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide | 74 |