![](/images/new-backgrounds/1200375/20037547x1.webp)
Installing Your Phone | 2 |
| |
Updating Your Phone Firmware |
|
|
|
|
|
On models with no screen, such as the Cisco SPA501G, the lines glow green and you hear a dial tone when picking up the handset or pressing the speakerphone button.
If the phone does not start, confirm your installation and connections. If these are correct, try unplugging the phone and plugging it back in again. If you still do not see the display, contact your phone administrator or Internet Telephony Service Provider (ITSP).
Updating Your Phone Firmware
Your phone ships with
!
CAUTION If you are using your phone with an Internet Telephony Service Provider system, do not update your phone firmware without consulting your service provider. Your provider can automatically update your phones without any action on your part necessary.
To update your phone firmware, do one of the following:
•Download the firmware from Cisco.com and install it from your PC. (See the next section for instructions.)
•Update by using the Cisco Voice System Setup Wizard (for example, if your phone is part of a Cisco Voice System network). See the Cisco Voice System Setup Wizard User Guide.
Determining Your Current Firmware Version
Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G,
Cisco SPA512G, Cisco SPA514G:
STEP 1 Press the Setup button.
STEP 2 Scroll to Product Info and press select.
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide | 24 |