Cisco Systems SPA514G, SPA512G, SPA504G, SPA509G, SPA502G, SPA501G manual Setting Voice User Parameters

Using the Phone Web User Interface	5
Setting Voice User Parameters

Setting Voice User Parameters

The voice User parameters control the phone user options, such as caller ID and speed dial numbers.

The table identifies and describes the parameters in the User tab.

Parameter	Description
Cfwd Setting	Choose yes from the drop-down menu to enable call
	forwarding. Choose no to disable the feature.
Cfwd All Dest	Enter the target phone number to where all calls are
	forwarded. When this field is anything other than blank, the
	phone rings once and the call is forwarded.
CFWD Busy Dest	Enter the target phone number to where all calls are
	forwarded when this phone is busy.
CFWD No Ans	Enter the target phone number to where all calls are
Dest	forwarded.
CFWD No Ans	Enter the number of seconds to delay before forwarding
Delay	calls because there is no answer at your phone.
Speed Dial X	Enter the target a phone number, IP address, or URL that
	will be called or launched when you press the speed dial
	number. You can configure up to eight speed dials, one for
	each of the numbered keys 2 through 9.
CW Setting	Choose yes from the drop-down menu to enable call
	waiting. Choose no to disable the feature. Call waiting alerts
	you when you are on a call by ringing the phone and
	displaying a status message that you have an incoming call.
	If you turn call waiting off, incoming calls do not ring your
	phone when you are on another call, and the caller hears a
	busy signal or message.
Block CID	Choose yes from the drop-down menu to block your caller
Setting	ID from displaying on another phone. Choose no to disable
	the feature.

Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 70