![](/images/new-backgrounds/1200375/20037535x1.webp)
Installing Your Phone | 2 |
| |
Connecting the Handset |
|
|
|
|
|
Numbered objects in Figure 1 are described in the following table.
# | Description |
|
|
1 | Auxiliary port. (For use only with the Cisco Attendant Console.) |
|
|
2 | Upper slots. |
|
|
3 | Lower slots. |
|
|
4 | PC port. |
|
|
5 | Network (switch) port. |
|
|
6 | Cable run. |
|
|
7 | Handset port. |
|
|
8 | Power port. (Use only with a Cisco PA100 power adapter.) |
|
|
Connecting the Handset
STEP 1 Turn the phone body over to expose the ports on the back of the device.
!
CAUTION Do not insert a telephone line cord into the auxiliary (AUX) port.
STEP 2 Insert the long end of the phone cord into the handset port on the phone body that is marked with a phone symbol.
STEP 3 (Optional) Route the phone cord through the cable slot.
STEP 4 Insert the other end of the phone cord into the port at the bottom of the handset (not shown).
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide | 18 |