![](/images/new-backgrounds/1200375/200375121x1.webp)
Using Advanced Phone Features | 4 |
| |
Using the Interactive Voice Response Menu on the Cisco SPA501G |
|
|
|
|
|
Using the Interactive Voice Response Menu on the Cisco SPA501G
The Cisco SPA501G provides an interactive voice response menu. You can enter options and receive information about the phone and its operation.
To access the IVR:
STEP 1 Press the Setup button.
Enter the IVR option by pressing the numbers of the option, then press #. Some menus require entering of further information or numbers.
Typical options you might use are listed in the following table:
Number | Option |
|
|
100 | Tells you if Dynamic Host Configuration Protocol (DHCP) is enabled. |
|
|
110 | Recites the IP address of the phone. |
|
|
120 | Recites the netmask of the phone. |
|
|
130 | Recites the gateway address. |
|
|
140 | Recites the MAC (hardware) address of the phone. |
|
|
150 | Recites the phone software version. |
|
|
160 | Recites the primary DNS server address. |
|
|
170 | Recites the HTTP port on which the web server listens. Defaults to 80. |
180Recites the IP multicast address (used by a Cisco Voice System to communicate with the IP phone).
220Recites the method of call control (SIP or SPCP).
221Set call
•0: SIP
•1: SPCP
To save, press 1; to review, press 2; to
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide | 61 |