•Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call.
•Talk Mode -
The handset is off the base and talk/flash has been pressed enabling a dial tone.
•Standby Mode -
The handset is not in use, off the base and talk/flash has not been pressed. A dial tone is not present.
Battery use time (per charge)
From fully charged
•Up to seven hours continuous use during talk mode.
•Up to fourteen days when the handset is in the standby mode.
Low battery alert
When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, “Low Battery” appears on the LCD and none of the keys will operate.
If the phone is in use, “Low Battery” flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.
The last number dialed in the redial memory and the numbers stored in the memory locations are retained for up to 30 minutes while you replace the battery pack.
Cleaning the charging contacts
To maintain a good charge, it is important to clean the charging contacts on both the handset and base unit once a month. Use a dry cloth or pencil eraser to clean. If the contacts become very dirty, using water only, dampen a cloth to clean the charging contacts. Then make sure to go back over the charging contacts with a dry cloth before returning the handset to the base to charge.
[ 10 ] G E T T I N G S TA R T E D | www.uniden.com |
