Step 3: Preparing the battery pack

Charge the battery pack for 12-15 hours before you start using your phone.

1 Press and slide the battery compart- ment cover toward the bottom of the unit.

2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.

3 Securely close the battery compart- ment cover by sliding it up until it snaps into place.

4 Place the handset on the base unit with the keys and display facing upward.

This position lets you see Caller ID messages on the display.

When the handset has been properly placed on the charging terminals of the base unit, the “status” LED of the base unit lights and charging begins. Charge the battery for 12-15 hours. You can place either side up for charging the battery.

9

Page 10
Image 10
Uniden EXI 8966 manual Preparing the battery pack