Applying Power to the Base Unit

This phone requires an AC outlet, without a switch to interrupt power, and the included AC adapter. To relieve strain on the DC plug when the phone is placed on a desk or table, connect the adapter as shown below.

Wrap the power cord around the strain relief notch on the bottom of the Base Unit.

Place the power cord so that it does not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards.

Adapter Safety Feature

The AC adapter furnished with this phone may be equipped with a polarized line plug — a plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug.

Do Not alter the shape of the blades of the polarized plug!

If you cannot plug the AC adapter into the outlet, contact someone about replacing the outlet.

Installation

EXS9005

9

Page 12
Image 12
Uniden EXS9005 manual Applying Power to the Base Unit, Adapter Safety Feature