Chain Dialing
On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a special access code, such as when performing a banking transaction. To do this, simply:
1.Store the access code into one of the memory numbers.
2.Dial the main number.
3.At the appropriate time, press mem followed by the memory location number where the access code is saved.
Erasing a Stored Number
To erase a number previously stored in a memory location
1. Remove the Handset from the Base Unit.
2. Press mem twice.
3. Press the
Example:
for memory location 02, you would press 0, then 2.
A confirmation tone (double beep) indicates that the number is erased.
If you enter a invalid
❊If more than 30 seconds elapse between each keystroke entry or step, an error tone will sound and the erase procedure will be canceled.
28 | EXS9005 |
