Do not use an outlet controlled by a wall switch | Uniden EXS9005

6.Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit.

Put the cord inside the molded channel on the bottom of the Base Unit.

7.Place the Base Unit on the screws and push down until it’s firmly seated.

8.Plug the other end of the telephone line cord into the wall jack.

9.Plug the AC Adapter into a standard 120 VAC wall outlet.

✻Do not use an outlet controlled by a wall switch.

16

EXS9005

Image 19

Uniden EXS9005 manual Do not use an outlet controlled by a wall switch

Contents

Page Rechargeable Nickel-Cadmium Battery Warning Precautions Controls and Keys Contents Important Safety Instructions Battery Safety Precautions Introduction Features Included with the EXS9005 Included with the EXS9005 Important Electrical Considerations Telephone Line ProblemsRange More Than One Cordless Telephone Radio Interference Telephone Line Outlets InstallationConnecting the Telephone Cords Selecting a Location Adapter Safety Feature Applying Power to the Base Unit Desk or Tabletop Installation Use only the Uniden AC Adapter supplied with this phone Standard Wall Plate Mounting Wall Installation Seated Direct Wall Mounting Installation Do not use an outlet controlled by a wall switch Installing the Handset Battery Pack Setting Up Your PhoneRaising the Antenna Initial Battery Charging Charging the Battery Pack Battery Memory Effect Low Battery Indicator Setting the Pulse/Tone Switch Cleaning the Battery Contacts Ringer Tone and Volume Adjusting Ringer ControlsReceiver volume Attach the beltclip Changing the BeltclipRemove the Beltclip Making and Receiving Calls Using Your PhoneFlash and Page/Find Storing a Number in Memory Programming Your Phone Programming Your Phone Storing a Mixed Number 5551212 3300 Example Dialing a Stored Number Erasing a Stored Number Chain Dialing Problem Suggestion Troubleshooting Base Unit SpecificationsHandset Uniden America Corporation One Year Limited Warranty Uniden America Corporation