Connecting the Charger to Your Scanner

You can charge both batteriesat the same time. To fully
charge both batteries,you should leave the AC
Adapter/Charger connectedfor 14 – 16 hours.
1. Follow steps 1 and 2
under

Charging the

Spare Battery

on
page 12, then
connect the charging
lead on the CRX120
to the charging jack
on your scanner.
2. When charging is
complete, disconnect
the CRX120 from
your scanner, then
unplug the AC
Adapter/Charger from
the CRX120.
Adapter Safety Feature
The AC Adapter included with thisscanner may be
equipped with a polarized line plug —a plug with one
blade wider thanthe other. This plug will fit into a power
outlet onlyone way. If you are unable to insertthe
adapter’s pluginto an outlet, try reversing the plug.
DCIN12V
13