The first step in tracking a trunked system is storing the
frequencies in one of the 10 available banks in your
scanner.
1. Press and hold T.
You will hear two
beeps, and
BANK
and
TRUNK
will begin to
flash in the display.
2. Choose the bank you
want to trunk track.
For example, press
2.
3. Use the keypad to
enter a frequency for
the trunked system.
For example, enter
856.2625, or enter a
frequency of the
system you’re going
to track.
Then press E.
Note: To clear a mistake while entering a
frequency, press
.
twice, and start over.
If you enter a non-800
MHz trunked repeater
output frequency, an
error message
displays.
Press
.
and go
back to Step 3.
12345678910
BANK
TRUNK
12345678910
38