Uniden scanning radio Scanning

Scanning

1. After programming

frequencies, simply

press Sto begin

scanning.

2. The indicator for each bank which willbe scanned

appears in the display, while the bankbeing

currently monitored flashes. You candeselect banks

from active scanning by pressing theirnumber on

your keypad. The indicator for each deselected bank

turns off, and the bank’s channels arenot scanned.

Note: One Bank must always be active. You cannot

deactivate all ten banks at the same time. If you try

to turn all the banks off, the first bank is

automatically selected.

To restore a bank to active scanning, press the

bank’s number on your keypad. The bank’s indicator

will display again.

3. During normal

scanning the scanner

skips unprogrammed

or locked out

channels.

4. When a transmission

is received, the

Scanner stops on that

channel. When the

transmission ends,

scanning resumes

automatically.

1 3 4 5 9 102 6 7 8

CHANNELS

Frequency not

entered

Frequency

Locked Out

(L/O)

SCAN

12345678910

Contents

Main CONTENTS Page Introduction TrunkTracking Important Notice Terminology What is Scanning? Turbo Search What is Searching? What is Trunk Tracking? TrunkTracker Trunk Tracking Feature Highlights Note: The frequency coverage is not continuous and excludes the cellular band. Where to Obtain More Information Betty Bearcat Frequency Guide www.uniden.com Information on the Internet Included with Your Scanner BC XLT860 BC XLT860 BC XLT860 OperatingGuide Setup Installing the Batteries Charging the Battery Pack Note: Disconnect the AC Adapter/Charger from the unit when charging is complete. CRX120 Battery Charger Charging the Spare Battery The red LED on the charger will light, indicating that the battery is charging. Connecting the Charger to Your Scanner Charging the Spare Battery Adapter Safety Feature Page Basic Operation Note: You can fold out the Front Cover to see the Controls and Indicators while reading this Guide. VOLUME Setting the Squelch Keylock LOCK Programming ba a b Duplicate Frequency Alert Programming Tips Page Scanning 1 3 4 5 9 102 6 7 8 Page Lockout in Scanning Mode Lockout Tips Restore a Locked Out Channel Restore All Locked-Out Channels Note: You must be in Manual mode before restoring all locked-out channels. ba Priority Scan Changing the Priority Channel Two beeps indicate that the Priority Channel is changed. ba Searching Setting a Search Range Search Hold Feature Data Skip The indicator appears on the display. The Channel Skip Storing Search Frequencies Note: After this step you are in manual mode. SVC Scanning Y SVC Scan Lockout Programming with SVC Scan Page Trunk Tracking TrunkTracker: National Public Safety Trunked System Frequency Guide , and Motorola, * Page Setting the Squelch Programming Trunking Frequencies 2 Searching a Trunked Bank Page ID Hold Mode ID Lockout Restore a Single ID Restore all IDs Searching Tips ID Delay Mode Hold Mode ID Monitor Mode Channel Activity Indicators Page Scan Lists Programming Scan Lists Manually E . Programming Scan Lists During Search P Page Fleet Map Programming R TRUNK Types of Trunking Systems Selecting Trunking Programming Mode Youll hear two short beeps and Selecting a Preset Fleet Map Programming a Fleet Map Programming a Hybrid System Care and Maintenance General Use Location Cleaning Repairs S Troubleshooting BC 235XLT SQUELCH If your is not performing properly, try the following steps. TrunkTracker www.uniden.com Specifications Appendix Preset Fleet Maps Page User Defined Fleet Maps Type I Programming Information 405-12 Fleet Map Size Codes Size Code Restrictions Page Precautions Page Top View and Display 23 24 30 29 28 27 888.8888 One Year Limited Warranty