If you experience difficulty while in
TrunkTracker™
mode,
try the following steps.
Problem Suggestion
Scannerwon’t track the
trunkedsystem. 1. May not be a system which can be
trackedby your scanner.
2. Missing the data frequency.
3. Change to a Type 1 Scannersetup.
ReviewFleet Map Programming on
page50.
Scannerwon’t stop during
Scan Listmode. 1. No IDs have beenprogrammed.
2. The IDs you havestored are not active.
Scannerwill not acquire
datachannel. 1. Adjust the squelch for trunking mode.
Seepage 37.
2. Missing the frequency used forthe data
channel. Checkyour frequency list.
Missingreplies to
conversations. 1. Change to a Type 1 Scannersetup.
ReviewFleet Map Programming on
page50.
2. Try another Preset Fleet Map orProgram
your ownFleet Map.
3. Check to see thatall of the systems
frequencieshave been entered.
ChannelActivity Indicators
areflashing but no sound
isheard.
1. May be a private ortelephone
interconnectcall, which are intentionally
blocked byyour scanner.
2. The ID in your displayis not active.
If you still cannot get satisfactory results while using your
scanner or if you want additional information, please callor
write the Uniden Parts and Service Division. The address
and phone number are listed in the Warranty at the end of
this manual. If you would like immediate assistance, please
call Customer Service at (800) 297-1023.
If you have internet access, you can visit
www.uniden.com
or
www.trunktracker.com
for
additional information.
57