If you are in Trunking Scan mode:
1. Press Tto return to
conventional mode if
you have been
monitoring a trunking
bank.
2. Press and hold T
until you hear two
short beeps.
You’ll hear two short
beeps and
BANK
and
TRUNK
will begin to
flash in the display.
3. Select the trunking
bank you want to
program.
Selecting a Preset Fleet Map1. Select the Trunking
Programming mode
and the bank you
want to change.
2. Press D.
3. Use)or(to choose
E1
.
4. Press D.
5. Use)or(to choose
the map you want.
For example,
E1P2
.
12345678910
12345678910
BANK
TRUNK
12345678910
BANK
TRUNK
12345678910
BANK
TRUNK
12345678910
BANK
TRUNK
51