Redial from Talk Mode
1Press 
.
“Talk” and the volume setting appears on the display.
If you set the ringer to off, “<Ringer Off>” appears on the display.
2Press 
.
The last number dialed will be displayed and redialed.
3To hang up, press
or place the handset on the base. The
Tone Dialing Switch-over
Some telephone companies use equipment that require pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can
be entering your bank account number after you have called your bank. The digits of your bank account can be sent using DTMF tones.
Initially make your call with the pulse dialing mode. Once your call connects,
press 
. Enter the desired number (like in the example above, the bank account number). These digits will be sent as tone dialing. This special number can be stored in a memory location. This is referred to as Chain Dialing (See page 27). Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
•Only the last number dialed can be accessed
after 
has been pressed.
•The tone feature only applies when the dial mode is set to pulse.
B A S I C S [ 19 ]
