Uniden TRU548 owner manual Installing the Battery Pack

Models: TRU548

1 68
Download 68 pages 61.44 Kb
Page 13
Image 13

B. Installing the Battery Pack

Charge the battery pack for at least 15-20 hours before plugging the telephone jack and start using your phone.

1 Press in on the battery cover release and slide the cover down until it comes off.

2 Connect the battery pack connector with the correct polarity (black and red wires) to the jack inside of the battery compartment.

Do not exert any force on this connection. It could cause damage to the battery or to the handset. The plastic connectors will fit together in only one way. Once you are certain that you have made a good connection, then insert the battery pack into the battery compartment. Do not pinch the wires.

3 Securely close the battery compartment cover by sliding it up until it snaps into place.

4 Place the handset on the base. Remove the beltclip, if attached, for face up charging.

BATTERY PLUG-IN

DIRECTION

BLACK RED

Use only the Uniden Battery (BT-800) supplied with your phone.

Replacement batteries are also available through the Uniden Parts Department (See page 5).

G E T T I N G S TA R T E D [ 7 ]

GETTING STARTED

Page 13
Image 13
Uniden TRU548 owner manual Installing the Battery Pack