Step 1 Charging the Battery
INSTALL THE HANDSET BATTERY
Remove the cover.
Connect the battery pack connector with the correct polarity.
Replace the cover.
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged, plug the telephone cord into the base unit and then into a telephone wall jack.
Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Setting up the phone, Choose the
Step 4 Setting up
Answering System
TO SELECT CALLER ID OPTIONS
Press menu/mute.
Press + or - to move the pointer to “Caller ID Setup”, then press select/ch.
Press + or - to move the pointer to an option, then press select/ch.
Press + or - to change the option setting.
Press select/ch and return the handset to the base.
Q U I C K R E F
PLUG INTO AC POWER
Plug the AC adapter cord into the base unit and then to a 120V AC outlet.
Place the handset in the base.
You must charge the battery pack Note: continuously for
before using the phone.
dialing mode” in your owner’s manual.
Step 3 Setting up the Caller ID Options/Language
Note: Three Caller ID options
are available: Auto Talk, Caller ID on Call Waiting (CIDCW) and Area Code.
TO CHOOSE THE LANGUAGE
Press menu/mute.
Press + or - to move the pointer to “Language”, then
press select/ch.
Press + or - to change the option setting.
Press select/ch and return the handset to the base.
TO TURN THE ANSWERING SYSTEM ON/OFF
Press answer on/off to turn On the system. To turn Off the system, press answer on/off again.
TO SET GREETING MESSAGE
Press and hold greeting.
Start recording your message. Position yourself as near to the base as possible.
When finished, press greeting
or .
E R E N C E G U I D E