Uniden TRU5885 manual Selecting a Different Channel, Find Handset, Way Conferencing, B A S I C S

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. This function works only when the phone is in use.

Press select/ch. “Scanning” appears on the display, indicating the phone is changing to another channel. For more information on interference, refer to “Radio Interference” on page 64.

Find Handset

To locate the handset, press find handset/transfer on the base when the base is in the standby mode. The handset beeps for 60 seconds, and “Paging” appears on the handset display.

Paging is canceled when pressing any key on the handset or find handset/transfer on the base. Additionally, if you receive an incoming call, page is canceled.

3-Way Conferencing

The phone permits 3-way conversations between the handset, base, and an outside line.

When speaking on the handset

1) Press (talk) on the base to initiate the 3-way conversation.

2) To hang up, press (talk) on the base. The handset will still be connected to the call.

When speaking on the base

1) Press talk/flash on the handset to initiate the 3-way conversation.

2) To hang up, return the handset to the base, or press end on the handset. The base will still be connected to the call.

•If the handset battery is completely drained, the handset will not beep when paging.

•If you press xfer/del on the handset during the 3-way conversation, error tone sounds.

•During the 3-way conversation, all the

base keys except

(talk), volume ^ v, and mute are disabled.

•If the base and handset do not connect in 30 seconds, the operation is canceled.

•3-way conferencing is not permitted between the handset speakerphone, base speakerphone and an

outside call. If you

press (talk) on the base when using the handset speakerphone, you will hear a beep, and vice versa.

B A S I C S [ 23 ]

BASICS