Voice memo
The voice memo function allows the user to record messages (more than 2 seconds and within 10 minutes).
1)Press and hold memo rec. You hear a beep.
2)Start your recording after the announcement “Record memo message” and a confirmation tone. The message counter displays “ ”.
3)When you have finished, press memo rec or 
to stop recording. The system returns to standby.
•The voice memo messages are recorded as incoming messages.
•When the answering system is full, “ 
” appears on the display and recording is terminated.
•If there is an incoming call, or if you press talk/flash or spkr on the handset or 
(talk) on the base, the operation will be canceled.
Recording a conversation
You can record a conversation while you are using your phone (more than 2 seconds and within 10 minutes).
1)During a conversation from the handset, press and hold memo rec on the base. The unit begins recording and “ ” flashes on the message counter.
A beep, that can be heard by both parties, sounds during recording.
2)To stop recording, press 
or memo rec. You hear a confirmation tone.
•A recorded conversation is treated as a typical message and will be added to the stored messages.
•You cannot record a
• When the answering system is full, “ 
” appears on the display and recording is terminated.
• If you press end or xfer/del on the handset, the operation will be canceled.
Every state has different regulations governing the recording of conversations over the telephone. Make sure to check your local, state and federal laws before using this product to record any telephone conversation in order to determine that your use is in compliance with such laws or guidelines.
THE INTEGRATED ANSWERING DEVICE
T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 49 ]
