Engine Oil

1.Make sure pump/engine is on level ground.

2.Pull the engine oil dipstick from its holder.

3.Verify that oil level (Figure 7) is maintained between the two notches on the dipstick.

ENGINE OIL

DIPSTICK

SAFE OPERATING

OIL LEVEL

ADD ENGINE OIL

Figure 7. Engine Oil Dipstick

4.If engine oil is low, fill engine crankcase with lubricating oil through filler hole (Figure 8), but do not overfill.

5.The oil listed in Table 5 is recommended to ensure better engine performance. Use class CD or higher grade motor oil.

ENGINE

OIL FILLER

HOLE

Figure 8. Engine Oil Dipstick

 

 

 

 

 

 

INSPECTION

 

Table 5. Oil Selection Chart

 

 

F

C

 

 

 

OIL: SAE

 

 

 

 

 

 

 

 

 

 

 

 

 

122

50

 

 

 

 

 

 

 

 

 

104

40

 

 

 

 

 

 

 

 

 

86

30

 

 

 

 

 

 

 

 

40

68

20

5W/30

5W/40

10W

10W/30

10W/40

15W/40

20W/20

30

50

10

 

 

 

 

 

 

 

 

 

32

0

 

 

 

 

 

 

 

 

 

-14

-10

 

 

 

 

 

 

 

 

 

-4

-20

 

 

 

 

 

 

 

 

 

-22

-30

 

 

 

 

 

 

 

 

 

-40

-40

 

 

 

 

 

 

 

 

 

Battery

This unit is of negative ground. DO NOT connect in reverse. Always maintain battery fluid level between the specified marks. Battery life will be shortened, if the fluid level are not properly maintained. Add only distilled water when replenishment is necessary.

DO NOT over fill. Check to see whether the battery cables are loose. Poor contact may result in poor starting or malfunctions. Always keep the terminals firmly tightened. Coating the terminals with an approved battery terminal treatment compound. Replace battery with only recommended type battery.

The battery is sufficiently charged if the specific gravity of the battery fluid is 1.28 (at 68° F). If the specific gravity should fall to 1.245 or lower, it indicates that the battery is dead and needs to be recharged or replaced.

Before charging the battery with an external electric source, be sure to disconnect the battery cables.

Battery Cable Installation

ALWAYS be sure the battery cables are properly connected to the battery terminals as shown in Figure 9. The RED cable is connected to the positive terminal of the battery, and the BLACK cable is connected to the negative terminal of the battery.

POSITIVENEGATIVE

REDBLACK

BATTERY

Figure 9. Battery

PAGE 22 — MQ62TDD TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #0 (07/30/09)

Page 21 Page 23
Page 22
Image 22
Multiquip MQ62TDD manual Inspection, Engine Oil, Battery Cable Installation
Page 21 Page 23

MQ62TDD specifications

The Multiquip MQ62TDD is a robust engine-driven compressor designed to deliver exceptional performance and reliability in challenging job site conditions. This portable unit is engineered for a wide range of applications, including construction, HVAC, and industrial use. With its powerful engine and user-friendly features, the MQ62TDD stands out as an ideal choice for contractors needing dependable air supply on the go.

One of the primary features of the MQ62TDD is its impressive air output. The unit boasts a maximum air flow rate of up to 62 CFM, allowing it to power multiple pneumatic tools simultaneously. Whether you are operating jackhammers, nail guns, or air impact wrenches, the MQ62TDD ensures consistent and sufficient air pressure to keep your projects moving efficiently.

The MQ62TDD is equipped with a 9-horsepower Honda engine, providing the necessary power to drive the compressor. Honda engines are renowned for their durability and fuel efficiency, and this model is no exception. With an extended run time due to its large fuel tank, the MQ62TDD minimizes downtime, which can be crucial in time-sensitive projects.

In terms of technological advancements, the MQ62TDD features an advanced cooling system designed to keep the compressor operating at optimal temperatures, thus extending the lifespan of the unit. The unit’s lightweight design, combined with a sturdy frame, makes transportation on site straightforward. The integrated handle and collapsible wheels facilitate easy maneuverability, ensuring that the compressor can be relocated without hassle.

Safety is also a priority with the Multiquip MQ62TDD. The unit is designed with protective features such as a low oil shutdown mechanism, which helps to prevent engine damage by automatically turning off if the oil level gets too low. Additionally, the compressor features sound-dampening technology that significantly reduces noise levels, making it ideal for use in noise-sensitive environments.

Overall, the Multiquip MQ62TDD compressor is a versatile, durable, and user-friendly tool that meets the demands of professional contractors. With its high air output, reliable power source, advanced technologies, and safety features, it provides the efficiency and performance needed to tackle any job with confidence.
Top Page Image Contents