Engine Components

	4	17
	3	17
	3
	13	5
2		6
	14
1	8
	8
	16	7
	15
	12 11	9
	12 11
	10

Figure 5. Deutz Engine Basic Components

Figure 5 illustrates the location of the basic components for the Deutz engine. The function of each component is described below:

1. Oil Filter – Replace this filter as recommended in the maintenance section of this manual

2. Fuel Filter – Replace or clean the fuel pump or fuel filter as specified in the maintenance section of this manual.

3. Engine – This pump uses a 29 horsepower air-cooled, 2-cylinder, four stroke Deutz diesel engine. See Deutz engine owners manual for more detailed information.

4. Oil Filler Port Cap Upper – Remove this cap to add engine oil to the crankcase.Fill with recommended type oil as specified in the maintenance section of this manual.

5.Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element. Replace with only manufactures recommended type air cleaner.

6. Cooling Fan Blades – Make sure that the blades of the cooling fan are not bent or broken. A damaged fan blade can cause the engine to run hot and overheat.

7. Starter Motor/Solenoid – +12 VDC electrical device used to engage the flywheel when starting the engine.

8. Fuel Solenoid – Stops the flow of fuel into the injection system when the ignition key is in the OFF position. When ignition key is in the ON position fuel will flow into the injection system.

9. Alternator – Provides power to the electrical system. Replace with only manufactures recommended type alternator. s switch will shutdown the engine

10. Fan V-Belt – ALWAYS make sure V-belt is properly tensioned. A loose or defective V-belt can adversely affect the performance of the pump.

11. Speed Control Lever – Regulates engine speed. When pumping always place this lever in the high engine speed position.

12. Dipstick – Remove dipstick to determine if engine oil is low. Maintain oil level at the "H "marking on the dipstick. NEVER run engine with low oil.

13. Control Box – Includes ignition switch, reset switch and engine warning staus indicators.

14. Oil Filler Port Cap Lower – Remove this cap to add engine oil to the crankcase.Fill with recommended type oil as specified in the maintenance section of this manual.

15. Crankcase Drain Plug – Remove this plug to drain engine oil from the crankcase. Replace with recommended engine oil as specified in the maintenance section of this manual.

16. Oil Sending Unit – In the event of low oil in the engine crankcase or low oil pressure, the indicator lamp will illuminate. STOP the engine immediately if this occurs. NEVER run the engine when this lamp is lit.

17. Muffler/Guard – DO NOT touch the muffler when engine is running. The muffler can become extremely hot, causing severe burns. NEVER run the pump with the muffler guard removed.

PAGE 20 — MQ62TDD TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #0 (07/30/09)

MQ62TDD specifications

The Multiquip MQ62TDD is a robust engine-driven compressor designed to deliver exceptional performance and reliability in challenging job site conditions. This portable unit is engineered for a wide range of applications, including construction, HVAC, and industrial use. With its powerful engine and user-friendly features, the MQ62TDD stands out as an ideal choice for contractors needing dependable air supply on the go.

One of the primary features of the MQ62TDD is its impressive air output. The unit boasts a maximum air flow rate of up to 62 CFM, allowing it to power multiple pneumatic tools simultaneously. Whether you are operating jackhammers, nail guns, or air impact wrenches, the MQ62TDD ensures consistent and sufficient air pressure to keep your projects moving efficiently.

The MQ62TDD is equipped with a 9-horsepower Honda engine, providing the necessary power to drive the compressor. Honda engines are renowned for their durability and fuel efficiency, and this model is no exception. With an extended run time due to its large fuel tank, the MQ62TDD minimizes downtime, which can be crucial in time-sensitive projects.

In terms of technological advancements, the MQ62TDD features an advanced cooling system designed to keep the compressor operating at optimal temperatures, thus extending the lifespan of the unit. The unit’s lightweight design, combined with a sturdy frame, makes transportation on site straightforward. The integrated handle and collapsible wheels facilitate easy maneuverability, ensuring that the compressor can be relocated without hassle.

Safety is also a priority with the Multiquip MQ62TDD. The unit is designed with protective features such as a low oil shutdown mechanism, which helps to prevent engine damage by automatically turning off if the oil level gets too low. Additionally, the compressor features sound-dampening technology that significantly reduces noise levels, making it ideal for use in noise-sensitive environments.

Overall, the Multiquip MQ62TDD compressor is a versatile, durable, and user-friendly tool that meets the demands of professional contractors. With its high air output, reliable power source, advanced technologies, and safety features, it provides the efficiency and performance needed to tackle any job with confidence.

Multiquip MQ62TDD manual Engine Components, Deutz Engine Basic Components

Models: MQ62TDD