MAINTENANCE (ENGINE)

Check Oil Level

Check the engine crankcase oil level prior to each use, or when the fuel tank is filled. Make sure the pump is level. The oil level must be between the two notches on the dipstick as shown in Figure 17.

ENGINE OIL

DIPSTICK

SAFE OPERATING

OIL LEVEL

ADD ENGINE OIL

Figure 17. Dipstick

Changing Engine Oil

1.Change engine oil after first 20 hours of operation.Drain and refill engine crankcase with the correct type and amount of oil (reference Table 5) after 250 hours of operation hours or once a week thereafter.

SEALING

WASHER

DRAIN

PLUG

Figure 18. Oil Drain

2.Remove drain plug (Figure 18) and sealing washer let engine flow into a suitable container while engine oil is still warm.

3.Reinstall drain plug and seal washer.Tighten drain plug securely. Add engine oil through the filler hole.

Changing Oil Filter

1.Replace engine oil filter (Figure 19) after 250 hours of operation.

2.Remove oil filter cannister from engine by turning cannister counterclockwise.

OIL FILTER

GASKET

TURN CLOCKWISE

TO TIGHTEN

OIL

FILTER

TURN

COUNTER-CLOCKWISE

TO LOOSEN

Figure 19. Oil Filter

3.Lubricate oil filter gasket with a small amout of oil. Reinstall oil filter by rotating cannister clockwise. DO NOT over-tighten.

Changing Fuel Filter

1. Replace fuel filter (Figure 20) every 500 hours.

FUEL FILTER

GASKET

TURN CLOCKWISE

TO TIGHTEN

FUEL

FILTER

TURN

COUNTER-CLOCKWISE

TO LOOSEN

Figure 20. Fuel Filter

MQ62TDD TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #0 (07/30/09) — PAGE 29

Page 28 Page 30
Page 29
Image 29
Multiquip MQ62TDD manual Check Oil Level, Changing Engine Oil, Changing Oil Filter, Changing Fuel Filter
Page 28 Page 30

MQ62TDD specifications

The Multiquip MQ62TDD is a robust engine-driven compressor designed to deliver exceptional performance and reliability in challenging job site conditions. This portable unit is engineered for a wide range of applications, including construction, HVAC, and industrial use. With its powerful engine and user-friendly features, the MQ62TDD stands out as an ideal choice for contractors needing dependable air supply on the go.

One of the primary features of the MQ62TDD is its impressive air output. The unit boasts a maximum air flow rate of up to 62 CFM, allowing it to power multiple pneumatic tools simultaneously. Whether you are operating jackhammers, nail guns, or air impact wrenches, the MQ62TDD ensures consistent and sufficient air pressure to keep your projects moving efficiently.

The MQ62TDD is equipped with a 9-horsepower Honda engine, providing the necessary power to drive the compressor. Honda engines are renowned for their durability and fuel efficiency, and this model is no exception. With an extended run time due to its large fuel tank, the MQ62TDD minimizes downtime, which can be crucial in time-sensitive projects.

In terms of technological advancements, the MQ62TDD features an advanced cooling system designed to keep the compressor operating at optimal temperatures, thus extending the lifespan of the unit. The unit’s lightweight design, combined with a sturdy frame, makes transportation on site straightforward. The integrated handle and collapsible wheels facilitate easy maneuverability, ensuring that the compressor can be relocated without hassle.

Safety is also a priority with the Multiquip MQ62TDD. The unit is designed with protective features such as a low oil shutdown mechanism, which helps to prevent engine damage by automatically turning off if the oil level gets too low. Additionally, the compressor features sound-dampening technology that significantly reduces noise levels, making it ideal for use in noise-sensitive environments.

Overall, the Multiquip MQ62TDD compressor is a versatile, durable, and user-friendly tool that meets the demands of professional contractors. With its high air output, reliable power source, advanced technologies, and safety features, it provides the efficiency and performance needed to tackle any job with confidence.
Top Page Image Contents