Manuals / Multiquip / Kitchen Appliance / Trash Compactor

Multiquip MQ62TDD Shutdown/Storage, Engine SHUT-DOWN, Pump Inspection After USE, Pump Storage

Models: MQ62TDD

1 116
Download 116 pages 33.79 Kb
Page 26
Image 26

SHUTDOWN/STORAGE

ENGINE SHUT-DOWN

1.Place engine speed control lever in the idle position and let the engine run at this speed for at least 2 minutes. This will allow the engine to cool-down.

2.Turn ignition key counter clockwise to position 0 (OFF).

CAUTION — Engine Shutdown

NEVER attempt to stop the engine by manually activating the engine shutdown lever. ALWAYS use the ignition key to turn off the engine.

3.Remove ignition key and place key in safe location where it will not get lost.

CAUTION — Ignition Key Safeguarding

When pump is not in use, keep ignition key in a safe place, out of the reach of unauthorized persons.

PUMP INSPECTION AFTER USE

It is recommended that the pump be inspected after each use for damage or wear.

1.Visually inspect the pump for any signs of wear or damage. Replace any worn or defective components as specified in the maintenance section of this manual.

2.Open pump clean-out cover and remove any foreign debris that may have accumulated.

3.Inspect all hoses, fittings and clamps. If defective replace immediately.

4.Inspect impeller for wear or damage and measure impeller clearance if it appears worn. Inspect interval should be about every 1000 hours. This inspection should be done when the pump is scheduled for maintenance inspection.

PUMP STORAGE

For storage of the pump for over 30 days, the following is required:

Drain the fuel tank completely.

Run the engine until the fuel in the injection system is completely consumed.

Completely drain used oil from the engine crankcase and fill with fresh clean oil, then follow the procedures described in the engine manual for engine storage.

Remove the drain plug from the pump and drain out any water from left in the housing.

Remove the pump cover and clean inside of pump housing. Coat inside of pump housing with a light film of oil to reduce corrosion. A spray can of oil works well for this application.

Cover suction and discharge ports with duct tape to prevent any foreign matter from falling into pump.

Cover pump and engine with plastic covering or equivalent and store in a clean, dry place.

PAGE 26 — MQ62TDD TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #0 (07/30/09)

Page 25 Page 27
Page 26
Image 26
Multiquip MQ62TDD manual Shutdown/Storage, Engine SHUT-DOWN, Pump Inspection After USE, Pump Storage
Page 25 Page 27

MQ62TDD specifications

The Multiquip MQ62TDD is a robust engine-driven compressor designed to deliver exceptional performance and reliability in challenging job site conditions. This portable unit is engineered for a wide range of applications, including construction, HVAC, and industrial use. With its powerful engine and user-friendly features, the MQ62TDD stands out as an ideal choice for contractors needing dependable air supply on the go.

One of the primary features of the MQ62TDD is its impressive air output. The unit boasts a maximum air flow rate of up to 62 CFM, allowing it to power multiple pneumatic tools simultaneously. Whether you are operating jackhammers, nail guns, or air impact wrenches, the MQ62TDD ensures consistent and sufficient air pressure to keep your projects moving efficiently.

The MQ62TDD is equipped with a 9-horsepower Honda engine, providing the necessary power to drive the compressor. Honda engines are renowned for their durability and fuel efficiency, and this model is no exception. With an extended run time due to its large fuel tank, the MQ62TDD minimizes downtime, which can be crucial in time-sensitive projects.

In terms of technological advancements, the MQ62TDD features an advanced cooling system designed to keep the compressor operating at optimal temperatures, thus extending the lifespan of the unit. The unit’s lightweight design, combined with a sturdy frame, makes transportation on site straightforward. The integrated handle and collapsible wheels facilitate easy maneuverability, ensuring that the compressor can be relocated without hassle.

Safety is also a priority with the Multiquip MQ62TDD. The unit is designed with protective features such as a low oil shutdown mechanism, which helps to prevent engine damage by automatically turning off if the oil level gets too low. Additionally, the compressor features sound-dampening technology that significantly reduces noise levels, making it ideal for use in noise-sensitive environments.

Overall, the Multiquip MQ62TDD compressor is a versatile, durable, and user-friendly tool that meets the demands of professional contractors. With its high air output, reliable power source, advanced technologies, and safety features, it provides the efficiency and performance needed to tackle any job with confidence.