RULES AND REGULATIONS

WARNING — Read This Manual

Failure to follow instructions in this manual may lead to serious injury or even DEATH! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

GENERAL SAFETY

„ DO NOT operate or service this equipment before reading this entire manual.

„This equipment should not be operated by persons under 18 years of age.

„NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

„ NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication.

„NEVER operate this equipment under the influence of drugs or alcohol.

„NEVER disconnect any "emergency or safety devices".These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties.

„NEVER use accessories or attachments that are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

„Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties.

„Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

„ALWAYS check the equipment for loosened threads or bolts before starting.

„NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing engine or pump.

„ALWAYS allow the engine to cool before

adding fuel or performing service and maintenance functions. Contact with hot components can cause serious burns.

„NEVER operate this equipment in any enclosed or narrow area where free flow of the air is restricted. The engine of this equipment requires an adequate free flow of cooling air. If the air flow is

restricted it will cause serious damage to the equipment or

engine and may cause injury to people and property. Remember the engine gives off DEADLY gases.

„ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

„ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool.

„DO NOT smoke around or near the

equipment. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

„NEVER operate the equipment in an

explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

„DO NOT top-off fuel tank. Topping-off is dangerous as it causes fuel to spill.

„ALWAYS store the equipment in a clean, dry location out of the reach of children.

„NEVER run engine without air cleaner. Severe engine damage may occur.

„NEVER leave the equipment unattended with the engine running.Turn off engine when unattended.

„CAUTION must always be observed while servicing this equipment. Rotating parts can cause injury if contacted.

PAGE 10 — MQ62TDD TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #0 (07/30/09)

Page 9 Page 11
Page 10
Image 10
Multiquip MQ62TDD manual Rules and Regulations, General Safety
Page 9 Page 11

MQ62TDD specifications

The Multiquip MQ62TDD is a robust engine-driven compressor designed to deliver exceptional performance and reliability in challenging job site conditions. This portable unit is engineered for a wide range of applications, including construction, HVAC, and industrial use. With its powerful engine and user-friendly features, the MQ62TDD stands out as an ideal choice for contractors needing dependable air supply on the go.

One of the primary features of the MQ62TDD is its impressive air output. The unit boasts a maximum air flow rate of up to 62 CFM, allowing it to power multiple pneumatic tools simultaneously. Whether you are operating jackhammers, nail guns, or air impact wrenches, the MQ62TDD ensures consistent and sufficient air pressure to keep your projects moving efficiently.

The MQ62TDD is equipped with a 9-horsepower Honda engine, providing the necessary power to drive the compressor. Honda engines are renowned for their durability and fuel efficiency, and this model is no exception. With an extended run time due to its large fuel tank, the MQ62TDD minimizes downtime, which can be crucial in time-sensitive projects.

In terms of technological advancements, the MQ62TDD features an advanced cooling system designed to keep the compressor operating at optimal temperatures, thus extending the lifespan of the unit. The unit’s lightweight design, combined with a sturdy frame, makes transportation on site straightforward. The integrated handle and collapsible wheels facilitate easy maneuverability, ensuring that the compressor can be relocated without hassle.

Safety is also a priority with the Multiquip MQ62TDD. The unit is designed with protective features such as a low oil shutdown mechanism, which helps to prevent engine damage by automatically turning off if the oil level gets too low. Additionally, the compressor features sound-dampening technology that significantly reduces noise levels, making it ideal for use in noise-sensitive environments.

Overall, the Multiquip MQ62TDD compressor is a versatile, durable, and user-friendly tool that meets the demands of professional contractors. With its high air output, reliable power source, advanced technologies, and safety features, it provides the efficiency and performance needed to tackle any job with confidence.
Top Page Image Contents