Programming Base Speed Dial Numbers
The base allows you to store up to ten
To program numbers into the base speed dial memory:
) With the phone in standby, press [memory] on the base.
2) Use the base number keypad to enter the phone number that you would like to store (up to twenty digits). If you need the phone to pause during dialing, press [redial/pause] to insert a
3) Press [memory] again, and then press the number key [0] to [9] you want to use when dialing this phone number. You will hear a confirmation tone.
Note: If there is already a speed dial number saved to that number key, the phone number will be overwritten.
To delete stored numbers from the base speed dial memory:
) With the phone in standby, press [memory] on the base twice.
2)Press the number key [0] to [9] that contains the speed dial number you want to delete. You will hear a confirmation tone.
25
