Symptom | Suggestion | |
| • Make sure that you are not too far from the base. | |
The handset doesn’t ring or | • Make sure that your handset is registered to the main base unit. | |
receive a page. | • Charge the battery in the handset for 15 to 20 hours. | |
| • Change the Digital Security Code (see page 50). | |
You cannot register the | • Charge the battery pack in the handset for 15 to 20 hours. | |
• Change the Digital Security Code (see page 50). | ||
handset at the base. | ||
• Try resetting the handset (see Resetting the Handset on page 49). | ||
| ||
The handset doesn’t | • Change the Digital Security Code (see page 50). | |
communicate with other | ||
• Make sure that you have registered all handsets (see page 20). | ||
handsets. | ||
| ||
An extra handset can’t join the | • Make sure there are not two handsets already using the conference feature. | |
conversation. | • Make sure that another handset is not in privacy mode. | |
The answering system does | • Make sure the base is plugged in. | |
• Make sure that the answering system is turned on. | ||
not work. | ||
• Make sure that the message record time is not set to announce only. | ||
| ||
Time stamp cannot be heard. | • Make sure you have set the time (see Setting the Day and Time on page 41). | |
Messages are incomplete. | • Incoming messages may be too long. Ask callers to leave a brief message. | |
• The memory may be full. Delete some or all of the saved messages. | ||
| ||
There is no sound on the base | • Adjust the speaker volume on the base or handset. | |
or handset speaker during call | ||
• Make sure the call screen feature is set to on. | ||
monitoring or message review. | ||
| ||
Cannot access answering | • Make sure you are using the correct PIN number. | |
• Make sure that the | ||
system from a remote phone. | ||
least two seconds. If it cannot, try using a different | ||
|
52