T-coil (Handset only)

The T-coil feature, used by hearing aid users, reduces the magnetic noise interference generated by digital cordless phones. Individuals using hearing aides will turn off the hearing aid microphone to avoid interference issues and turn on T-coil. By toggling back and forth between T-coil on/off and the hearing aid microphone on/off, you can avoid excessive interference and hear clearly with the hearing aid device.

) Press the MENU soft key.

2)Select the HANDSET SETUP menu, and then the T-COIL submenu.

3)Move the cursor to select ON or OFF.

4)Press the OK soft key. You will hear a confirmation tone.

Note: Using the T-coil feature may shorten your battery’s talk time, please set to off when not using this feature.

Finding a Lost Handset

To locate a misplaced handset, press [flash/find hs] on the base when the phone is in standby. All registered hand- sets will beep for 60 seconds, and PAGING appears on the handset display. To cancel paging, press any key on the found handset or [flash/find hs] on the base.

Note: If the battery pack is completely drained, the handset will not beep when paged.

46

Page 47
Image 47
Uniden TRU9466 manual Finding a Lost Handset, Coil Handset only