Uniden TRU9466 Using the DirectLink Feature, Making a DirectLink Call, Exiting a DirectLink Call

Using the DirectLink Feature

A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This fea- ture is called DirectLink and will not interfere with the base’s ability to make or receive telephone calls while in use. To activate, you must set both handsets to the DirectLink feature. While using this feature, these two handsets will not be able to make or receive normal phone calls until this operation is canceled; however, other handsets will function normally.

Note: If the party is out of range, OUT OF RANGE appears in the display and the operation will be canceled.

) Press the MENU soft key and move the cursor to the DIRECTLINK menu.

2)Press the OK soft key. The display shows TO ENTER DIRECTLINK MODE PRESS . [ENTER].

3)Press the ENTER soft key. You will hear a confirmation tone, and DIRECTLINK MODE

COMPLETE appears in the display.

Making a DirectLink Call

) To call another handset with DirectLink, press the DIRECTLINK soft key.

2)Move the cursor to select the handset you want to call, and press the OK soft key. If the handset is out of range or not in DirectLink operation, the display shows

OUT OF RANGE.

Monitoring
｣ ｣ Handset	#2

LINE1 END LINE2

3)On the receiving handset, press the ANSWER soft key or [/flash].

Exiting a DirectLink Call

To exit the DirectLink feature and return to standby, press the CANCEL soft key and then the OK soft key. DI- RECTLINK MODE CANCEL appears in the display.

52