Making a call from a Caller ID Record
) When the phone is in standby, press [
] (on the right side of the
2)Use [
] or [
] to find the Caller ID record you want to dial.
3)To add (or delete) a “1” at the beginning of the displayed phone number, press [
tone]. To add (or remove) the stored area code to the displayed phone number, press [#].
4)Press [ /flash] or [
] on the handset or press [
] on the base to dial the number..
The phone will automatically select a free line. To select a particular line, press the LINE1 or LINE2 soft key.
Or
) Press [ /flash] or [
] on the handset or press [
] on the base..
The phone will automatically select a free line. To select a particular line, press the LINE1 or LINE2 soft key.
2)Press [
] to open the Caller ID list.
3)Use [
] or [
] to find the Caller ID record you want to dial.
4)To add (or delete) a “1” at the beginning of the displayed phone number, press [
tone]. To add (or remove) the stored area code to the displayed phone number, press [#].
5)Press the DIAL soft key to dial the number.
Deleting Caller ID Numbers
To delete only one Caller ID number, go to the Caller ID list and select the number you want to delete.
Press the OPTIONS soft key. Select DELETE SELECTION. When the phone asks you to confirm, select YES.
To delete all the Caller ID numbers, go to the Caller ID list and press the DELETE soft key. Select YES when asked if you want to DELETE ALL.
Note: When you delete a Caller ID number, you delete it permanently.
42
