SAFETY INFORMATION

WARNING: This product con- tainsand/orgenerateschemicals known to the State of California to cause cancer or birth defects or other reproductive harm.

IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate or service this heater. Improper use of this heater can cause serious injury or death from burns, fire, explosion, electrical shock and carbon monoxide poisoning.

DANGER: Carbon monoxide poisoning may lead to death!

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning resemble the flue, with head- aches, dizziness and/or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have heater serviced. Some people are more affected by carbon monoxide than others. These include pregnant women, persons with heart or lung disease or anemia, those under the influence of alcohol and those at high altitudes.

Make certain you read and understand all warn- ings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

1.Use only kerosene, #1#2 diesel/fuel oil, JET A or JP-8 fuels to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol or other highly flammable fuels.

2.Fueling

a)Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturerʼs instructions and applicable regulations regarding the safe fueling of heating units.

b)Only the type of fuel specified on the heaterʼs data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater al- lowed to cool, prior to fueling.

d)During fueling, all fuel lines and fuel-line connections shall be inspected for leaks. Any leaks shall be repaired prior to return- ing the heater to service.

e)At no time shall more than one dayʼs supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 25 feet (762cm) from heaters, torches, welding equipment and similar sources of ignition (exception: the fuel reservoir integral with the heater unit).

g)Whenever possible, fuel storage shall be confined to areas where floor penetrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accordance with the authority having jurisdiction.

3.Use only the electrical voltage and frequency specified on model plate.

4.Heater must be grounded. Use only a properly grounded three-wire extension cord. Plug into grounded outlet only.

5.Use only in areas free of flammable vapors or high dust content.

6.Minimum clearance from any combustible materials: 8 feet (244 cm) from hot air outlet; 4 feet (122 cm) from top; and 4 feet (122 cm) from sides and inlet.

7.Locate heater on a stable and level surface while hot or operating or a fire may occur.

8.Use only in well-vented areas. Before using heater, provide at least a three-square-foot (2800 square cm) opening of fresh, outside air for each 100,000 Btu/Hr (30 kw) of rating.

9.Keep children and animals away from heater at all times.

10.Never start heater when combustion chamber is hot or if fuel has accumulated in combustion chamber.

11.When used with thermostat, heater may start at anytime.

12.When heater is moved or stored, it must be in a level position or fuel spillage may occur.

13.Use heater only in accordance with local ordinances and codes.

14.Never use gasoline, crankcase drainings, naphtha, paint thinners, alcohol or other highly flammable fuels.

15.Never use heater where gasoline, paint thinner or other highly flammable vapors are present.

16.Never use heater in living or sleeping areas.

17.Never leave a heater plugged in without adult supervision if children or animals are likely to be present.

2

www.desatech.com

114909-01A

Page 2
Image 2
Desa 280-IF, 160-IF owner manual Safety Information

160-IF, 280-IF specifications

Desa 280-IF and Desa 160-IF are innovative and advanced models in the world of water heaters. These devices are designed to provide efficient heating solutions for residential and commercial needs, ensuring dependable performance and energy savings. Both models are equipped with a range of cutting-edge technologies and features that set them apart from traditional water heating systems.

One of the standout features of the Desa 280-IF is its high-efficiency rating, which significantly reduces energy consumption while providing optimal water heating. This model is engineered with advanced insulation materials that minimize heat loss, thereby ensuring that the water remains heated for longer periods. The Desa 160-IF is similarly designed, focusing on efficiency and performance while catering to smaller applications or homes with lower hot water demand.

In terms of technology, both models utilize a robust and user-friendly digital control system. This system allows users to easily set, monitor, and adjust the water temperature, ensuring maximum comfort. The intuitive interface is designed for simplicity, making it accessible for all users, regardless of their technical expertise.

Safety is a prime consideration in the design of Desa 280-IF and Desa 160-IF. Both models are equipped with multiple safety features, including over-temperature protection, automatic shut-off mechanisms, and pressure relief valves, ensuring safe operation even in challenging conditions. Furthermore, their compact designs make them suitable for various installation environments, including tight spaces in urban settings.

Durability is another hallmark trait of these models. Constructed from high-quality materials, the Desa 280-IF and Desa 160-IF are built to withstand the rigors of daily use. Their resistance to corrosion and wear prolongs the lifespan of the units, making them a wise investment for consumers.

Additional features include remote monitoring capabilities for enhanced convenience, allowing users to manage their water heating needs from their smartphones or other devices.

As a whole, Desa 280-IF and Desa 160-IF embody the integration of efficiency, innovation, safety, and durability, making them top choices for modern water heating solutions. Whether for a bustling household or a quieter residence, these models provide the comfort and reliability that consumers expect in today's fast-paced world.