![Continued](/images/new-backgrounds/42981/429815x1.webp)
SAFETY INFORMATION
Continued
18.Never move, handle, refuel or service a hot, operating or
19.Never attach heater to external fuel tank.
20.Heaters used in the vicinity of tarpaulins, canvas or similar enclosure materials shall be located a safe distance from such materials. The recommended minimum safe distance is 10 feet (304.8cm). It is further recommended that these enclosure materials be of a fire retardant nature. These enclosure materials shall be securely fastened to prevent them from igniting or from upsetting the heater due to wind action.
21.Unplug heater when not in use.
22.Never block air inlet (rear) or air outlet (front) of heater.
UNPACKING
MODEL
1.Remove all the materials used to package the heater for shipment.
2.Open the carton from the top.
3.Remove the flue connection from carton (see Figure 1).
4.Lift up and remove cardboard packaging.
5.Unscrew the locking screws on
6.Insert the flue connection onto the flue outlet tube (see Figure 4).
7.Carefully lower the heater from pallet.
Flue Outlet |
|
Tube | Flue |
| |
| Connection |
4.Unscrew the locking screws on hub locking bar (see Figure 2).
5.Remove the wheels from the hot air outlet (stored for shipping).
6.Lift the heater from the air outlet end.
7.Insert the wheels onto the axle.
8.Insert the locking washer (which is in the documentation envelope) with the convex side towards the exterior of the machine; using a hammer and an
9.Carefully lower the heater from pallet.
Flue Outlet Tube
Wheels Stored for Shipping
Flue |
|
|
|
Connection | Locking Screws |
| |
|
|
| |
Figure 2 - Removing | |||
Lock |
| Axle | |
Washer |
| ||
|
|
| |
|
| Wheel | |
Figure 3 - Wheel/Axle Assembly for | |||
|
|
| |
| PRODUCT |
| |
IDENTIFICATION |
| ||
Hot Air |
| Flue Connection |
|
Output |
| Upper |
|
|
| Fan | |
|
| Shell | |
|
| Guard | |
|
|
|
Locking Screws
Figure 1 - Removing
1.Remove all the materials used to package the heater for shipment.
2.Open the carton from the top.
3.Lift up and remove cardboard packaging.
Lower
Shell
Control | Power | Fuel Tank | |
Panel | |||
Cable | Cap | ||
| |||
Figure 4 - Vented Portable Forced Air Heater |
www.desatech.com | 3 |