Making a call from a Caller ID Record
) When the phone is in standby, press [
] (on the right side of the
2)Use [
] or [
] to find the Caller ID record you want to dial.
3)To add (or delete) a “1” at the beginning of the displayed phone number, press [
tone]. To add (or remove) the stored area code, press [#].
4)Press [ /flash] or [
] on the handset or pick up the base corded handset or [
] on the base to dial the num- ber.
The phone will automatically select a free line. To select a particular line, press the line key (the LINE1 or LINE2 soft key on the handset, or [LINE2] or [LINE2] on the base).
Or
) Press [ /flash] on the handset or pick up the base corded handset or [
] on the handset or [
] on the base.. The phone will automatically select a free line. To select a particular line, press the line key (the LINE1 or LINE2 soft key on the handset, or [LINE2] or [LINE2] on the base).
2)Press [
] to open the Caller ID list.
3)Use [
] or [
] to find the Caller ID you want to dial.
4)To add (or delete) a “1” at the beginning of the displayed phone number, press [
tone]. To add (or remove) the stored area code, press [#].
5)Press the DIAL soft key to dial the number.
Deleting Caller ID Numbers
To delete only one Caller ID number, go to the Caller ID list and select the number you want to delete. Press the DELETE soft key on the base. .
Or press the OPTIONS soft key on the handset, and select DELETE SELECTION submenu. When the phone asks
you to confirm, select YES.
To delete all the Caller ID numbers, go to the Caller ID list and press the DELETE soft key. Select YES when asked if you want to DELETE ALL.
Note: When you delete a Caller ID number, you delete it permanently.
39
